Engineering Extremes: Why Interlagos Tests Every Part of the Car

Lando Norris took his third win of the season at the São Paulo Grand Prix, finishing 14.6 seconds clear of Max Verstappen after newly crowned champion Kimi Antonelli spun from the lead at Turn 1, with Isack Hadjar completing a double Red Bull podium.

Rain returned in the closing laps to catch out several drivers, a reminder of how quickly conditions can change at one of the sport's most unpredictable venues.

But behind the result sits a circuit that asks a great deal of a car in a very short lap.

The Autódromo José Carlos Pace, better known as Interlagos, packs 15 corners into just 4.3km. It runs anticlockwise, rises and falls sharply across the lap, sits around 800 metres above sea level and has a surface that is both bumpy and abrasive. Each of those features makes its own demands on the car. For teams, and for the supply chains behind them, together they create a very particular set of demands.

An Anticlockwise Lap

Most circuits on the calendar run clockwise. Interlagos is one of the few that doesn't, and that changes how load travels through the car.

The long, fast left-hand sweep of the Curva do Sol is taken flat out, putting heavy and sustained lateral load through the right-hand side of the car and the right-hand tyres. Suspension, wheel assemblies and the structures that carry them all see a load pattern that differs from most of the season, and it has to be absorbed lap after lap.

Down the Hill, Up the Hill

Interlagos is built into a natural bowl, and elevation shapes almost every part of the lap.

The Senna S at Turn 1 is approached downhill at high speed. Braking while the track falls away reduces the load on the tyres just when the driver needs grip, and front-wheel locking is a constant risk, as Antonelli found when he spun from the lead.

At the other end of the lap, cars climb steeply from the Junção hairpin all the way to the finish line. Traction out of that corner sets the speed for the whole climb, so a car that struggles for grip at the exit loses time all the way up the hill.

A Rough, Abrasive Surface

The circuit's surface is known for its bumps, and sections between Turns 3 and 5 and around Turns 8 and 9 were resurfaced ahead of this year's race. Bumps force the familiar compromise between running the car low for aerodynamic performance and running it high enough to keep it stable. Every impact passes through the suspension, the floor and the structures around them for a full race distance.

The surface is also abrasive. With Pirelli bringing its softest-ever range to Interlagos, wear and rear tyre overheating were expected to be the main limits on race pace. It's a reminder that the materials inside a Formula 1 car need to withstand repeated impact and fatigue loading, not just steady peak loads.

The Weather Factor

Few circuits are as hard to predict as Interlagos.

Showers and persistent rain were forecast across the weekend, limiting the amount of representative dry running teams could use to refine their setups. In the race, the rain returned late, forcing teams to decide in moments whether to switch tyres. Wet conditions also change the way the car uses energy, with the activation point for one of the circuit's two Straight Line Mode zones moved significantly in the wet. A car set up for the dry suddenly has to work in very different temperatures and grip levels, and every component has to cope with the change.

What Makes Interlagos Unique on the F1 Schedule, and How Do Engineers Overcome It?

No other circuit on the calendar combines these pressures in quite the same way.

Its anticlockwise layout and the flat-out Curva do Sol load the right-hand side of the car in a way few other circuits do. Its elevation changes make braking into Turn 1 especially difficult and turn traction out of the final hairpin into a lap-defining challenge. Its bumpy, abrasive surface forces a compromise between ride height and stability, while working the tyres hard. And its weather can change the conditions completely within minutes, often with little dry running to prepare for it.

Engineers and Designers Don't Overcome This With a Single Fix

They respond across the whole car: suspension settings that absorb the bumps without unsettling the aerodynamic platform, brake balance and cooling for the downhill stop into Turn 1, traction-focused setups for the climb to the line, and tyre strategies that can adapt the moment the rain arrives. Every one of those responses depends on components and materials that hold their properties under repeated impact, asymmetric loading and rapidly changing conditions, which is precisely the environment our customers were engineering for in Brazil.

How Smiths High Performance Helps

Engineering a car for circuits as different as Interlagos, Mexico City and Singapore starts with the right materials, and that is where Smiths High Performance comes in.

We hold an extensive stock of high-performance materials developed for motorsport, including aluminium , titanium and magnesium alloys, high-performance steels , nickel superalloys and engineering plastics . Many have been developed further with our suppliers to perform at the operating limits our customers design to.

When a circuit exposes a weakness or a design changes late, our Rapid Response service and processing services help teams get the material they need quickly, prepared and ready for manufacture.

Every item in our stock is fully traceable through our barcoding system, and our UKAS-accredited testing laboratory provides independent verification of material properties. Our technical support team helps engineers and designers select the right material for each application.

With facilities in Biggleswade and Silverstone in the UK, and Maranello, Italy, we are well placed to support teams and their suppliers across the UK and Europe.

Smiths High Performance is a Tier 1 supply chain partner to the global motorsport industry, supplying high-performance alloys and engineering plastics to Formula 1, MotoGP, WEC, NASCAR and WRC.

Get in touch with Smiths High Performance to discuss your team's material and supply requirements.

Contact us at info@smithshp.com or call +44 (0)1767 604 708.

Supply Partners

We provide comprehensive engineering raw material support for global motorsport, including Formula 1 teams and their sub-contractors.

DISCOVER